A cup holder insert designed to convert coin trays either side of the hazzard light switch for a B6 VW Passat. Choice of different colour options available to suit your Passat specification. The product is made up of 2 pieces, a base and inside plate. The inside plate is removable for cleaning. Please note this doesn’t fit any other vehicle to my knowledge, I've only designed and tested it to the original B6 VW Passat. This product is listed as a single item, please purchase x2 quantity if you would like a pair.

Climate Note:
PLA deforms when exposed to high temperatures, vehicles in the heat often create a green house effect that can melt this product. To avoid the chance of this happening please don't keep or use this insert in your car during warmer climates.

Photographed Colours:
Base: Castle Grey
Inside Plate: Jet Black

Materials:
3D printed from PLA in the United Kingdom and made to order. PLA plastic is derived from renewable resources such as corn starch and the fabrication produces little to no waste. The 3D printing process may result in a few imperfections making each one unique.

Process:
I’m passionate about design and technology and fascinated by how products are styled, packaged and presented. 3D printing has been a hobby of mine for many years which sparked the creation of FilamentGifts. All of my products have been designed by myself and continuously tinkered and developed until I believe I have a design that will please others I can share it with.

Please contact me for other colour choices and let me know if you have any questions!

We’d love to see your product photos tagged on our Instagram @FilamentGifts

*This design is not affiliated with Volkswagen Group.

A cup holder insert designed to convert coin trays either side of the hazzard light switch for a B6 VW Passat.

Cup Holder Insert for VW Passat

Base Colour

Jet Black

 Ice White

 Castle Grey

 Groovy Gold

 Hazel Bronze

 Rustic Red

 Scarlet Red

 Hot Pink

 Peaceful Pink

 Royal Blue

 Sky Blue

 Tender Teal

 Deep Teal

 Bottle Green

 Bright Green

 Mint Green

Top & Inside Plate Colour

An insert for the Volkswagen Beetle (A5) centre console cup holder. Choice of different colour options available to suit your Beetle specification. The product is made up of 3 pieces, a base, top and inside plate. The top component is glued to the base and the inside plate is removable for cleaning. This doesn’t fit any other VW models to my knowledge, I've only designed and tested it to the A5 Beetle. Please make sure your cup holder matches the photo at end of the listing before purchasing. This particular cup holder is designed for standard size water bottles up to flasks with a base diameter of 65mm.

Climate Note:
PLA deforms when exposed to high temperatures, vehicles in the heat often create a green house effect that can melt this product. To avoid the chance of this happening please don't keep or use this insert in your car during warmer climates.

Photographed Colours:
First-
Base: Royal Blue
Top: Castle Grey
Inside Plate: Castle Grey

Materials:
3D printed from PLA in the United Kingdom and made to order. PLA plastic is derived from renewable resources such as corn starch and the fabrication produces little to no waste. The 3D printing process may result in a few imperfections making each one unique.

Process:
I’m passionate about design and technology and fascinated by how products are styled, packaged and presented. 3D printing has been a hobby of mine for many years which sparked the creation of FilamentGifts. All of my products have been designed by myself and continuously tinkered and developed until I believe I have a design that will please others I can share it with.

Please contact me for other colour choices and let me know if you have any questions!

We’d love to see your product photos tagged on our Instagram @FilamentGifts

*This design is not affiliated with Volkswagen Group.

An insert for the VW Beetle centre console cup holder. A simple solution if your original car cup holder has broken with no tools needed. Choice of different colour options available to suit your Beetle specification.

Cup Holder Insert for VW Beetle

An insert for the front centre console VW caddy cupholder. This design helps secure drinks and reduce the change of spillage. Choice of different colour options available to suit your Caddy specification. The product is made up of 3 pieces, a base, top and inside plate. The top component is glued to the base and the inside plate is removable for cleaning. This doesn’t fit the Touran, California, VW Beetle, VW Jetta or VW Passat models to my knowledge, I've only designed and tested it to the original Caddy centre console (see photographs).

Climate Note:
PLA deforms when exposed to high temperatures, vehicles in the heat often create a green house effect that can melt this product. To avoid the chance of this happening please don't keep or use this insert in your car during warmer climates.

Photographed Colours:
First-
Base: Jet Black
Top: Scarlet Red
Inside Plate: Scarlet Red

Second-
Base: Royal Blue
Top: Jet Black
Inside Plate: Jet Black

Materials:
3D printed from PLA in the United Kingdom and made to order. PLA plastic is derived from renewable resources such as corn starch and the fabrication produces little to no waste. The 3D printing process may result in a few imperfections making each one unique.

Process:
I’m passionate about design and technology and fascinated by how products are styled, packaged and presented. 3D printing has been a hobby of mine for many years which sparked the creation of FilamentGifts. All of my products have been designed by myself and continuously tinkered and developed until I believe I have a design that will please others I can share it with.

Please contact me for other colour choices and let me know if you have any questions!

We’d love to see your product photos tagged on our Instagram @FilamentGifts

*This design is not affiliated with Volkswagen Group.

An insert for the VW Caddy centre console cup holder. A simple solution if your original car cup holder has broken with no tools needed. Choice of different colour options available to suit your Caddy specification.

Cup Holder Insert for VW Caddy

A bird feeder created from the heart. The perfect gift for a nature lover or bird watching enthusiast. Featuring a recessed pocket for wildlife nibbles and an open shaped design for wide viewing angles.

Photographed colour:
- Castle Grey (Personalized - Grandma's Garden)
- Scarlet Red (Personalized - I Love You XXX)
- Royal Blue (Not Personalized)
- Groovy Gold (Not Personalized)

Personalisation:
- 16 characters max including spaces.
- Printed on one side of the lower front tip face of the heart.

Materials:
3D printed from PLA in the United Kingdom and made to order. PLA plastic is derived from renewable resources such as corn starch and the fabrication produces little to no waste. The 3D printing process may result in a few imperfections making each one unique. Includes string for attachment.

Dimensions: 205mm X 178mm X 80mm
Weight: approximately 135g

Process:
I’m passionate about design and technology and fascinated by how products are styled, packaged and presented. 3D printing has been a hobby of mine for many years which sparked the creation of FilamentGifts. All of my products have been designed by myself and continuously tinkered and developed until I believe I have a design that will please others I can share it with.

Please contact me for other colour choices and let me know if you have any questions!

We’d love to see your product photos tagged on our Instagram @FilamentGifts

A bird feeder created from the heart. The perfect gift for a nature lover or bird watching enthusiast. Featuring a recessed pocket for wildlife nibbles and an open shaped design for wide viewing angles.

Heart Bird Feeder - Personalisable

Colour

A bird feeder designed to look like classic pear drop sweets. The perfect gift for a nature lover or bird watching enthusiast. Featuring an open cavity for wildlife nibbles and access from both sides for birds to fly in and out.

Materials:
3D printed from PLA in the United Kingdom and made to order. PLA plastic is derived from renewable resources such as corn starch and the fabrication produces little to no waste. The 3D printing process may result in a few imperfections making each one unique. Includes string for attachment.

Process:
I’m passionate about design and technology and fascinated by how products are styled, packaged and presented. 3D printing has been a hobby of mine for many years which sparked the creation of FilamentGifts. All of my products have been designed by myself and continuously tinkered and developed until I believe I have a design that will please others I can share it with.

Please contact me for other colour choices and let me know if you have any questions!

We’d love to see your product photos tagged on our Instagram @FilamentGifts

A bird feeder designed to look like classic pear drop sweets. The perfect gift for a nature lover or bird watching enthusiast. Featuring an open cavity for wildlife nibbles and access from both sides for birds to fly in and out.


Pear Drop Bird Feeder

The Bookshark bookmark, a neat little gift for shark lovers. The sharks tail marks your page ready for your next bite size read. Personalise with a name or phrase in a variety of different colour options.

Photographed colour:
- Tender Teal (Jonny)
- Castle Grey (Sophie)
- Groovy Gold (Ben)
- Jet Black (Plain)
- Sky Blue (Ava)

Personalisation:
- 8 characters max.
- Letter characters only - No emojis, punctuation or numbers. 
- The more characters used the smaller the font.
- Readable from one side.

Materials:
3D printed from PLA in the United Kingdom and made to order. PLA plastic is derived from renewable resources such as corn starch and the fabrication produces little to no waste. The 3D printing process may result in a few imperfections making each one unique. Includes string for attachment.

Dimensions: 126mm X 47mm X 5mm
Weight: approximately 10g

Process:
I’m passionate about design and technology and fascinated by how products are styled, packaged and presented. 3D printing has been a hobby of mine for many years which sparked the creation of FilamentGifts. All of my products have been designed by myself and continuously tinkered and developed until I believe I have a design that will please others I can share it with.

Please contact me for other colour choices and let me know if you have any questions!

We’d love to see your product photos tagged on our Instagram @FilamentGifts

*This design is not affiliated with To Kill a Mockingbird Novel by Harper Lee.

The Bookshark bookmark, a neat little gift for shark lovers. The sharks tail marks your page ready for your next bite size read. Personalise with a name or phrase in a variety of different colour options.

Categories

Cup Holders

Cup Holder Insert for VW Passat

Cup Holder Insert for VW Beetle

Cup Holder Insert for VW Caddy

Bird Feeders

Heart Bird Feeder - Personalisable

Pear Drop Bird Feeder

Bookmarks

The Bookshark Bookmark - Personalisable